MICRO-TIG
DUAL-ARC

 

  • Precision in Micro-Tig welding
  • Ultra low current capability (0.1 amp)
  • No arc wander at low amperages
  • Soft TIG arc start will not damage small or delicate parts
  • Reduced heat input thru built-in arc pulsation
  • Accurate, repeatable welds
  • Panel programmable start current, upslope, weld current and final weld current levels
  • Manual and Automatic welding ability

Product Outline Specification:

Process Capability
Welding Amperage Capability
0.1 - 80 amps
Power Supply Dimensions
19.5" x 19.5" x 6.75"
Water Circulator Dimensions
19.5" x 19.5" x 6.5"
Power Supply Weight
80 Ibs
Water Circulator Weight
38 Ibs
System Input Voltage

110V (+/-10V), 230V-15 amps

50/60 Hz Single Phase

 
TIG TIG Welding Advantages Plasma Plasma Welding Advantages
Well-known and understood process
Protected electrode allows for more welds before electrode contamination
Readily available, low cost consumable parts
Arc standoff distance not as critical as in TIG
Excellent gas shielding for cleaner parts
Gentle Arc Transfer
Electrodes can be extended for improved weld joint access
Stable, stiffer arc reduces arc wander
Soft TIG arc can offer benefits for specific applications
No high-frequency arc starting noise
More forgiving of part fit-up problems in certain applications
Higher weld speeds possible in specific applications
 
Applications
 
Tool, mold and die repair, metal bellows, valves, metals seals, diaphragms, pressure transducers, sensors, implant devices, relay cans, capacitor cans, micro switches, batteries, motors, electronic devices, enclosures, pacemakers, explosive detonators, airbad components, air seals, tube/fitting assemblies, vacuum tubes, electrocautery tools, metal meshes, thermocouples, tube closure, surgical instruments, dental instruments, wires, aspiration needles, injection needles, surgical baskets, catheter metal capsules, guidewires, light bulb filaments and many more.
Applications